• Calgary’s Trusted Supplier of Beam Clamps, Ceiling Flanges, and Q-Deck Hangers

    Beam Clamps are used to support sprinkler systems and other suspended ceiling hardware. These can be used to hang security cameras, smoke detectors, and other devices up to 3,300 lbs. Contact Victory Plastics & Anchors in Calgary for beam clamps, ceiling flanges, and Q-deck hangers.

    Victory Beam Clamps

    We offer a sturdy clamp made from structural aluminum in 3 sizes, 1/4" - 3/8" - 1/2". They are used for hanging rods in the plumbing, electrical, and ventilation trades. Our 3/8 beam clamp holds more than a 3/8 Grinnell steel clamp.

    Size # Package Lab Pull-Test Recommended Load 5-1 Safety
    ¼ BC-14 100 2,000 lbs 400 lbs
    3/8 BD-38 100 3,300 lbs 401 lbs
    3/8 HD BC-HD 100 3,300 lbs 660 lbs
    1/2 BC-12 50 3,480 lbs 696 lbs

    Specifications Testing Documents

    We take precautions to make sure our products work properly. Here you’ll find a document pertaining to the load carrying ability of our clamps.

     

    Download Hardy BBT Limited.

  • Victory Ceiling Flanges

    Our ceiling flange can be used for plumbing, electrical, and ventilation rod hangers. Structural aluminum ceiling flanges can be fastened to any surface, wood, steel, and concrete. The threads hold 3300 lbs anchor, depending on what you fasten it to - wood, steel, etc.

    Size # Package Anchor Test Recommended Load 5-1 Safety
    ¼ CF-14 100 2,800 lbs 560 lbs
    3/8 CF-38 100 3,300 lbs 660 lbs
    1/2 CF-12 100 3,300 lbs 660 lbs
  • A.T.K. Q-Deck Hanger

    The A.T.K. Q-Deck Hanger is the only hanger on the market designed to suspend threaded rod from the Q-Deck. It’s the fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures, and more from a Q-Deck. The Q-Deck Hanger eliminates unsightly holes chiseled or punched in the side of the Q-Deck, weakening the deck. With the Q-Deck Hanger, you can keep damage to roof insulation to a minimum.

     

    The A.T.K. Q-Deck Hanger can be used as a pre-insert in concrete when used on top of the deck, by threading the rod up 2 1/2" and putting a hex knot on the rod, where there is concrete poured on top of the Q-Deck. Lab tests on a 23 gauge Q-Deck with 10 x 3/4 tek screws show the Q-Deck slotted at the screws' holes at 1,130 lbs. on the bottom and 1,570 lbs. on the top. Recommended loads at a 4-1 safety factor are 285 lbs. on the bottom and 390 lbs. on top.

     

    Specifications Testing Documents

    We take precautions to make sure all of our products work as they should. Here you’ll find documents on the load carrying abilities, aluminum clips, and other hardware of the Q-Deck Hanger:

    Below you’ll find a chart detailing the lab pull-tests and recommended load safety of our Q-Deck Hangers.

    Size # Package Lab Pull-Test Top Lab Pull-Test Bottom Recommended Load 5-1 Safety Top Recommended Load 5-1 Safety Bottom
    ¼ QD-14 100 1,570 lbs 1,130 lbs 314 lbs 226 lbs
    3/8 QD-38 100 1,570 lbs 1,130 lbs 314 lbs 226 lbs
    1/2 QD-12 50 4 hole 1-1/2" wide - -
    Created by

    Legal notice